The illuminator accessory has a dual-pod housing incorporating a combination of long-life IR (850 nm/940 nm) + White light LEDs. The illuminator enables viewing of objects even in total darkness, ensuring high-quality images regardless of the lighting conditions. Functions Variable beam illumination IR arrays with multiple beam angles (ranging from 16° to 47°) provide illumination of a wide area of view. The MIC camera can steer the IR beam dynamically to match the illumination intensity with the camera's field of view according to the zoom level. Beam intensity is controlled automatically or manually, depending on user preference. Decreasing intensity reduces overexposure. The patented, integrated Constant Light technology supplies a consistent level of illumination during the life of the product, even in changing temperatures. IR Array As ambient light decreases in the scene, the camera switches to monochrome mode and automatically activates the IR LEDs of the illuminator. When IR illuminators are active, the IR focus correction feature is enabled automatically in the camera. The 940 nm LEDs allow operators to illuminate nearrange scenes with LEDs that human eyes cannot see. White light mode White light mode allows operators to capture full scene details in color. Operators can turn the White light LEDs on and off as necessary, especially to use as a deterrent effect. Operators have the option to set automatic timeout of the White light mode. After this mode times out, the illuminator will operate in IR mode. Operators can disable the White light functionality permanently or by sector in order to prevent activation in situations where White light might create a hazardous situation such as distracting a driver on a highway. Easy installation Install the illuminator accessory easily on a MIC IP ultra 7100i or MIC IP starlight 7100i camera mounted in upright, inverted, or canted orientation. The camera provides power to the illuminator. The illuminator does not need an additional power source. Robust design rated to an industry-leading IP68, Type 6P, IK10 The vandal-resistant design integrates tough, polycarbonate windows attached to an aluminum body with a durable, powder coat paint. The illuminator is exceptionally resistant to high levels of wind, shock, and vibration. The camera and the attached illuminator accessory have IP68/Type 6P dust and immersion ratings as well as IK10 impact rating. The ratings are standard for MIC products from Bosch. Certificat

IR Array

• Narrow x Medium Wide
• Number of LEDs x 12 4 4
• Wavelength x 850 nm 850 nm 940 nm
• Vertical Beam Angle x 15° FWHM 26° FWHM 45° FWHM
• Horizontal Beam Angle x 16° FWHM 28° FWHM 47° FWHM
• White light Array
• Number of LEDs x 6
• Color Temperature x 5600-6300K
• Vertical Beam Angle x 15° FWHM
• Horizontal Beam Angle x 32° FWHM
• Light intensity (3m) x 1000 lx
• IR Distance measurements, 850 nm
• MIC IP starlight 7100i x MIC IP ultra 7100i
• Detection x 550 m (1804 ft) 300 m (984 ft)
• Classification x 450 m (1476 ft) 250 m (820 ft)
• Recognition x 150 m (492 ft) 150 m (492 ft)
• Identification x 100 m (328 ft) 75 m (246 ft)

Electrical

• Power Consumption x 30 W (provided by the camera)

Environmental

• Operating Temperature x -40 °C to +65 °C (-40 °F to +149 °F)
• Cold Start-up Temperature x -40 °C (-40 °F)(Requires 60-minute warm-up prior to operation.)
• Storage Temperature x -60 °C to +70 °C (-76 °F to +158 °F)
• Humidity x 0-100%
• Wind Load x 209 km/h (130 mph) (sustained)(Gusts up to 290 km/h (180 mph)) Camera + installed illuminator accessory: Coefficient of Drag: 1.370Effective Projected Area (EPA): 0.089 m² (0.96 ft²) illuminator accessory only: Effective Projected Area (EPA): 0.019 m² (0.20 ft²)
• Vibration x NEMA TS2 Section 2.2.8 Vibration - 5-30 Hz, (0.5G)
• Shock x IEC 60068-2-27, Half Sine Impulse, 6ms, 40G NEMA TS 2 Section 2.2.9 Shock (Impact) Test Half Sine Impulse 11 ms, 10G
• Ingress Protection x IEC 60529, IP68, Type 6P (when attached to camera)
• External Mechanical Impact (IK Code or Impact rating) x IEC 62262, IK10 (when attached to a MIC camera)

Construction

• Construction Material x Cast aluminum with polycarbonate windows
• Standard Finish x Corrosion-resistant, powder coat paint, sand finish
• Color x White (RAL 9010)