Hall Research GLI-35MM Signal Splitters/Amplifiers Stereo Audio Ground-loop Isolator & Filter With 3.5mm Connectors Gli35mm 722301541715
New Listing!

Part Number: GLI-35MM
Condition: New
In Stock: Out of stock   
Real time availability   

Notify Me


Regular:$27.83
Save:$7.38 (29%)

Your Price:
$20.45

As low as $2/month
Buy Now, Pay Later




Square Trade
  • Shipping Insurance
  • Price Match Guarantee
  • Terms of Service Guarantee
  • Identity Theft Protection
FREE with your purchase
Expert Name, Expert Title
Let our Specialist make your purchase easier

Product Specifications



Hall Research Stereo Audio Ground-Loop Isolator & Filter with 3.5mm Connectors - 20 kHz - 20 Hz to 20 kHz - ABS Plastic GLI-35MM

STEREO AUDIO GROUND-LOOP ISOLATOR & FILTER WITH 3.5MM CONNECTORS

Manufacturer Part Number: GLI-35MM



CPN:STEREO AUDIO GROUND-LOOP ISOLATOR & FILTER WITH 3.5MM CONNECTORS
MANUFACTURER NAME: Hall Research
MANUFACTURER PART NUMBER: GLI-35MM
UPC EAN CODE: 722301541715
LANGUAGE: EN
MARKET:US

General Information:

GLI-3.5mm Stereo Audio Ground-Loop Isolator & Filter with 3.5mm connectors. Eliminates ground loop noise between any audio source such as a notebook PC and audio equipment. Perfect frequency response of +.03 db from 20 to 20,000Hz. Uses proprietary audio transformers and filters for total elimination of any spurious buzz and hum in the audio.

Have you ever connected a PC or notebook to an audio amp or a TV and gotten all kinds of ugly noise? Most people would answer yes, and that's because the audio output from these devices are not balanced. Professional equipment have balanced audio which uses a + and a - signal for each L/R side and therefore does not rely on ground. Any noise in the ground between the source of the Audio signal and the amplifier is automatically ignored. On the other hand unbalanced signals, such as the one coming out of your notebook, have no reference other than building/AC ground. In fact you may have noticed that if you disconnect your notebook power supply and ran on batteries the noise has gone away. This is because, by doing so you inadvertently eliminated the ground loop. Line-level audio is a very tiny low-level signal, so any noise in AC ground, even as little as 0.004v, will be quite audible - yuck!

The GLI-3.5mm is simply inserted in series with the audio and it literally eliminates the ground connection between the two sides, passes all the audio while filtering out any noise using high performance audio transformers.

In most cases the unit can be used in either direction, however it is designed so that the Female 3.5mm mini-stereo connector is to be used as input and the male connector is the output. The input side incorporates DC blocking capacitors. Some audio source equipment may have a DC bias voltage on their audio signal. In order to isolate this Bias level from the transformer coils, DC blocking capacitors are employed in the GLI-35mm.

It uses 1:1 audio transformers therefore it does not change the impedance. So if your load is 5K Ohm, adding the isolator in front of it, the source still sees a 5K Ohm load impedance.

A couple of important things to note:
The input side (the female 3.5mm at end of cable) has DC blocking capacitors, so it is a good idea to make sure to not reverse the input and output. Most audio sources should have these AC coupling caps on their outputs anyway (so their average output voltage is not biased at some DC voltage), but once in a while you have a source that has a DC output offset. If you connect the output with DC offset directly to the coils of the transformer a DC current will flow in the coil that may or may not affect the way the source behaves.

ManufacturerHall Research
Manufacturer Part NumberGLI-3.5MM
Manufacturer Website Addresshttp://www.hallresearch.com
Brand NameHall Research
Product ModelGLI-3.5MM
Product NameStereo Audio Ground-Loop Isolator & Filter with 3.5mm Connectors
Product TypeNoise Filter
  Product UPC722301541715
Technical Information:
Minimum Frequency20 Hz
Maximum Frequency20 kHz
Physical Characteristics:
Product MaterialABS Plastic
Height1"
Width1.7"
Depth1.3"
Miscellaneous:
Environmentally FriendlyYes

Date Inserted: Friday September 27, 2024

This product was last updated on Saturday November 2, 2024

All products are brand new and factory sealed unless otherwise stated.
 *** Disclaimer- Information is supplied by the Manufacturer. The image, including color, may differ from actual product appearance. CompSource, Inc. is not responsible for data. ***

Questions and Answers

Questions and Answers

Ask CompSource

Shipping / Returns

Shipping

Ground = $12.95
(Delivery within 2-7 business days)

Two Day Air = $25.00
(Delivery within 2 business days)

Standard One Day = $35.00
(Delivery within next business day)

Priority = $45.00
(Delivery within next business morning)

U.S Mail Priority (AA,AE,AP only) = $30.00

FedEx International Economy (Canada only) = $85.00

Typically out of stock items are filled within 1 to 14 business days but can and may take longer.

Shipping dates are best estimates based on product location and may vary with holidays.

If product requires trucking, additional fees may apply.

* Some destinations are subject to Applicable State/Duty Taxes

Returns

CompSource realizes that every product may have different return guidelines. Please see the policy below regarding this item.

This Product Has Limited Exchange Privileges.

Limited returns within 30 days of purchase permitted on this product.

For support on this product, please contact Hall Research.


Hall Research Company's Information

Accessories

Product Reviews

Overall Rating | Write a Review

    Best Sellers
    More Best Sellers

    Quick delivery of what I ordered. Very satisfied. larry
    More Reviews

    eStores

    Connect With Us