Note:

• The full product specifications below are from the manufacturer and may contain information related to other package quantities that will not apply to the product that you are reviewing. Please confirm the actual content and/or package quantity from the main product specifications page.
• These specifications may represent the entire product series/model/line to which this product belongs with specific configuration differences between the individual products stated.
• These specifications may have been copied from the same product in other region/country in which case there might be minor differences in region-specific data such as Input Voltage, Terms of Warranty etc.

Product SKUs
MBD-X10DRD-LTP -O:

• X10DRD-LTP (Standard Retail Pack)

MBD-X10DRD-LTP -B:

• X10DRD-LTP (Bulk Pack)

Physical Stats
Form Factor:

• E-ATX

Dimensions:

• 13.05" x 10.5" (33.1cm x 26.7cm)

Processor/Cache
CPU:

• Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP)
• Dual Socket R3 (LGA 2011)

Cores / Cache:

• Up to 18 Cores / Up to 45MB Cache

System Bus:

• QPI up to 9.6 GT/s

Note: ** Motherboard supports this maximum TDP. Please verify your system can thermally support.

System Memory
Memory Capacity:

• 8x 288-pin DDR4 DIMM slots
• Up to 512GB ECC LRDIMM, 256GB ECC RDIMM

Memory Type:

• 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes:

• RDIMM: 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB

Memory Voltage:

• 1.2 V

Error Detection:

• Corrects single-bit errors

On-Board Devices
Chipset:

• Intel® C612 chipset

AHCI SATA:

• SATA3 (6Gbps); RAID 0, 1, 5, 10

SCU SATA:

• SATA3 (6Gbps); RAID 0, 1, 5, 10

IPMI:

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC

Network Controllers:

• Intel® 82599ES Dual port 10G SFP+
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10G SFP+
• 1x Realtek RTL8201N PHY (dedicated IPMI)

Video:

• ASPEED AST2400 BMC

Input / Output
SATA:

• 6x SATA3 (6Gbps) ports

LAN:

• 2x 10 Gigabit Ethernet SFP+ ports
• 1x RJ45 Dedicated IPMI LAN port

USB:

• 7x USB 2.0 ports total
  (4 rear, 2 via headers, 1 Type A)

Video:

• 1x VGA port

Serial Port / Header:

• 2x COM Ports (1 rear, 1 header)

DOM:

• 2x SuperDOM (Disk on Module) ports

TPM:

• 1x TPM 1.2 20-pin Header

Chassis (Optimized for X10DRD-LTP )
1U Chassis:

• SC514-441
• SC514-505
• SC514-R400C
• SC815TQ-R500CB

Important Chassis Notes:

• To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.

SuperServer(s) with X10DRD-LTP
Model(s):

• SYS-6018R-TDTP
• SYS-6018R-TDTPR

Expansion Slots
PCI-Express:

• 1x PCI-E 3.0 x8 slot

System BIOS
BIOS Type:

• 128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features:

• Plug and Play (PnP)
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1

Management
Software:

• Intel Node Manager
• IPMI 2.0
• NMI
• SuperDoctor® 5
• Watch Dog

Power Configurations:

• ACPI Power Management
• Power-on mode for AC power recovery

PC Health Monitoring
Voltage:

• Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, +3.3V Standby, VBAT, Memory Voltages.
• 6 Phase-switching voltage regulator

FAN:

• 8x 4-pin fan headers (up to 8 fans)
• 8x fans with tachometer monitoring
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors

Temperature:

• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x Fan Connectors
• Thermal Monitor 2 (TM2) support
• PECI

LED:

• CPU / System Overheat LED
• Suspend static indicator LED
• UID/Remote UID

Other Features:

• RoHS

Operating Environment
Operating Temperature Range:

• 10°C - 35°C (50°F - 95°F)

Non-Operating Temperature Range:

• -40°C - 70°C (-40°F - 158°F)

Operating Relative Humidity Range:

• 8% - 90% (non-condensing)

Non-Operating Relative Humidity Range:

• 5% - 95% (non-condensing)