Note:

• The full product specifications below are from the manufacturer and may contain information related to other package quantities that will not apply to the product that you are reviewing. Please confirm the actual content and/or package quantity from the main product specifications page.
• These specifications may represent the entire product series/model/line to which this product belongs with specific configuration differences between the individual products stated.
• These specifications may have been copied from the same product in other region/country in which case there might be minor differences in region-specific data such as Input Voltage, Terms of Warranty etc.

• Networks per PC : 32 (TCP/IP Ethernet or RS-485, supervised)
• Controllers per Network : 8
• Communication Between Controllers :Supervised RS-485
• Speed :Programmable 9.6 - 56Kbps
• Distance :4,000ft (1,200m)
• Cable Type :18AWG, 2 conductor, twisted, shielded
• Cards per Panel : 3,000 (up to ten digit card numbers)
• Access Levels per Panel : 3,000 (one per card per panel)
• Site Codes per Panel : 10 (site code programming is not mandatory)
• Off line Transactions Buffer : 3,000 FIFO, command, and alarm priority
• Access Points (Readers/Keypads) :4 (Red, Green LED and Buzzer control)
• Distance :Max 500ft (150m)
• Cable Type :20 - 22AWG, 6 or 8 conductor, shielded
• Simultaneous Card Formats per Panel : 5, Wiegand or Clock & Data
• Programmable Supervised Inputs :8
• Input Supervision :four state monitoring (1 or 2 resistors)
• Distance :Max 1,000ft (300m)
• Cable Type :20 - 22AWG, 2 conductor
• Programmable Outputs :4 SPDT 5A @ 30VDC, dry contacts/4 Electronic drivers, 12VDC max, 100mA
• Output mode :Programmable Fail Safe/Fail Secure
• 4 SPDT 5A @ 30VDC, dry contacts
• 4 Electronic drivers, 12VDC max, 100mA
• Enclosure Size and Weight: W/L/H 12” x 14” x 3.25”, Kit with readers 12 lbs.
• Power Requirements : 16.5VAC, 40VA transformer (not included)
• Recommended Back-up Battery : 12V, 7AH lead acid or gel cell (not included)