Simply45™ the industry leading brand for RJ45 modular plug innovation and performance solutions introduces our ProSeries Shielded with External Ground Pass Through RJ45 Modular Plug, S45-1755P. The uniquely designed and patent pending Simply45™ ProSeries S45-1755P simplifies and improves the terminated plug performance for shielded 10G LAN cables. The Simply45™ ProSeries S45-1755P Pass Through RJ45 modular plugs are by far the highest performing, easiest to use, and most cost-effective way to professionally terminate 10G Shielded and other large diameter shielded LAN cables.

The S45-1755P are IEEE 802.3 10GBase-T compliant and are recommended for shielded 10G LAN Cables Cat7a/7/6a with FPE insulated wires; and Large OD Shielded LAN cables with PE insulated wires such as Cat6 STP and Cat6a F/UTP. These plugs include some unique features that simplify the RJ45 10G termination process and improves the terminated plug performance.

Simply45™ ProSeries introduces the exclusive Cap45™ (patent pending). Cap45™ is an isolation cap/bar that snaps onto the front of the pass through RJ45 plug after termination, covering the exposed wire ends. Cap45™ prevents against electrical shorting in the RJ45 socket due to improperly trimmed wires or in device sockets that may not be 100% compliant. With Cap45™, any electrical risks associated with exposed wire ends are now eliminated completely.

Cap45™ is a MUST HAVE for all pass through RJ45 modular plugs used in commercial and certified system terminations.

Learn more about the Simply45™ ProSeries innovations in our ProSeries Product Linesection.

Our S45-1755P ProSeries Pass Through RJ45 modular plugs incorporate the following features:

Two Piece Plug. We tried all that we could to use a one-piece design, but it proved too difficult to work with during the testing trials. As such, we separated the metal shell shield from the RJ45 body. This allowed us to make additional modifications and the result is a dramatically improved termination process that is faster and easier to use. Separating the plug body from the metal shield allows the large diameter 10G LAN cables to be inserted further into the plug. This is a significant advancement in RJ45 design because this feature improves NEXT performance by reducing the length of untwisted wires inside the plug. Please refer to our Technical Bulletin "It's All About Those Twists" for more information on how this feature raises RJ45 performance.

The S45-1755P supports performance standards: ANSI/TIA 568.2-D for Cat7a/7/6a/6; ISO/IEC 11801 Class F, Ea and E. Supports 10GBaseT performance applications over shielded twisted pair cables.

BarS45™ Load Bar (patent pending) - Again, we tried everything we could to avoid using a load bar for the shielded pass-through plugs, but without a load bar we could not achieve the desired IEEE 802.3 10GBASE-T performance levels we were demanding. The uniquely designed BarS45™ load bar does 3 things:

• BarS45™ is made of a material that provides better signal isolation improving NEXT performance;
• BarS45™ Improves the signal integrity by reducing the length of open untwisted wires inside the plug;
• BarS45™ is the easiest and fastest load bar to use for 10G LAN cable termination. No more headaches fiddling with the wires trying to get them to fit through the front of the pass through RJ45 plug. BarS45™ makes it so easy.

• Pro Network Connector
• Cap45
• BarS45